These flexible exhaust pipes are intended for weld in installation in an exhaust system to isolate noise, relieve vibration, and reduce the stress on the pipes a stainless steel internal bellows for vibration isolation, and an internal stainless steel braid to reduce noise, and whistling.

Made of Stainless Steel, durable, and corrosion resistant.

Universal for most cars to use.

No instruction included.

Material: Stainless Steel

Color: Silver Tone

Inner Diameter: 51mm / 2"

Outer Diameter: 55mm / 2.17"

Unwelded Length: 152mm / 6"

Overall Length: 252mm / 10"

First, remove the old exhaust flex pipe.

Then place the free end of the new exhaust flex pipe on it and adjust the position of the muffler and downpipe until it is straight but without tension.

Pass the bolt through the hole at the end of the exhaust flex pipe connected to the muffler flange. Tighten them to secure the pipe to the flange.

Place a new clamp where the exhaust flex pipe meets the downpipe and tighten it. Retighten the bolts that secure the muffler and downpipe.

Please allow a 1-2mm error due to manual measurement.

Please wear gloves when installing to avoid scratches.

Professional Installation is highly recommended!

1 x Car Exhaust Flex Pipe